Ducati 250 MK3 WC race/parade bike




Ducati 250 MK3 wide case race/parade bike

 

CMRC registered but not raced for some time

 

 

 

Engine and rolling chassis recently rebuilt including the following work

Frame and parts powder coated

New four leading shoe front brake fitted

Borrani rims with good tyres

Engine refreshed including the following work and specification

Repairs to bevel drive including new bearings, sleeve and faces stellite welded and ground back to STD size

Twin plug cylinder head

Coil spring conversion

Green &  white cam

Arias piston

Moira electronic ignition

NB racing rear shocks

Gibson exhaust

New Vic Camp race fairing

Engine number - 112204

Frame number -  97742

 

Will be sold with the following

Selection of spares including sprockets, cables plugs, ignition system (Rita) piston rings, clutch plates etc

Carburettor (MK2 Amal)

Car type starter rollers

Two piece leathers with all good zips (44 chest, 36 waist)

All you need for your racing, parades or track days

 

Open to sensible offers!!

 

Information on history

The previous owner bought the bike in 2010 and used it for parades at various circuits around the UK. Due to illness he decided to sell it in 2017, when I bought it.

My plan was also to parade the bike but once a detailed examination was carried out it became apparent that a substantial amount of work would be required. I have carried this out over the last 9 months.

I have now decided that I am too old to 'parade' as planned and as such, wish to sell the bike.

Work carried out is as follows.

Engine

This was stripped due to a top end rattle and problems with the bevel drive identified. The top bevel self aligning bearing housing was worn and a new one was produced and fitted along with the self aligning and camshaft bearings.

The top and bottom bevel shaft 'd' joint was worn and both shafts were stellite welded, machined and refitted with a new (Lacey supplied) sleeve. Bearings were replaced where necessary.

The bottom end was stripped with bearings and gaskets replaced as required.

It now sounds much better!

Primary gears are standard and whilst the gearbox works well, I do not have details the ratios.

It is fitted with a 'wet' clutch.

The only other point to note is that, at some time the cylinder head has had a small weld repair at the joint face. There was no sign of any leakage when I got the bike and since repairs all seems well.

Chassis

This has been refurbished including new brackets for the seat, tank, footrests and exhaust. The battery carrier has been moved backwards and lowered to create more clearance for the carburettor.

The frame. swinging arm and all attachments have been powder coated.

The front brake was poorly fitted and required reworking, including new cables and machining of the brake shoes. It is now an excellent brake.

The tank is made of GRP and has no leaks.

---------------------------------------------------------

The words have been supplied by the seller, in the first instance please contact us for more details

The bike is located near Bristol

 


Price: £3,850.00 VAT Free

Add to Cart:  
  • Model: BA250


 

 

UKTNET e-commerce website hosting & design
Visit the UKTNET website